Eye Drop Bottle Cap Mold

Cap mold is one of big demand molds among mold business since it has many types with various sizes. Such as flip top cap mold, oil cap mold, 5 gallon cap mold, shampoo cap mold and so on. Our produced molds are already favored by a lot of customers from all over the world.

Below is one kind of cap mold specification, we called it eye drop bottle cap mould.

1. Mold name: eye drop bottle cap mold

2. Mould steel: P20, 2316, S136 and so on, or according to customer's request. 

3. Delivery time: 30-60days.

4. Guaranteed life: ≥1,000,000 shots

5. Mold cavity: 4cavity, 6cavity, 8cavity, 12cavity, 16cavity, 20cavity, 24cavity, 32cavity etc. 

6. Hot runner: Anole not runner, Yudo hot runner, Inco hot runner, or according to customer’s request.

7. Insert materials: cavity and core with imported 2316 stainless steel or S136, P20, and so on, or according to customer's request.

8. Ejector way: fully automatic unscrewing + stripper tube

9. Heating system: with double heating system, it has separate temperature control mode, the heat bar are used to heat hot-runner manifold, small heaters supply the heating temperature for cavity nozzle continuously.

10. Cooling system: each parts including core, cavity has independently cooling system.

Besides cap mold, our company also manufacture kinds of cap machines, like cap injection molding machine, cap slitting machine ,Cap folding machine ,cap lining machine, cap assembling machine and cap compression machine.

Post by Miss Mandy

Email: service32@sinomould.com

Whatsapp:008615757610702

Plastic Battery Box Molding Solution

SINO Group is professional on supplying plastic battery box production molding equipment which contains battery box mold, injection molding machine, robot, and chiller and so on. Commonly, battery box includes two parts: one is battery box base, another one is battery box cover. Below are specifications of battery box molds made by Sino Mould:Product material: PPMold steel: DIN1.2738, 718H, P20Mold life: 500KRunner type: hot runner, one tip for battery box cover mold; but for battery box base mold, we suggest one tip for one latticeEject way: ejector pin for battery box cover; stripper plate for battery box base.
                                                          
Battery box molding machine:We suggest using servo motor injection molding machine for producing battery box production. The advantage is could save 20%-80% energy and with servo motor, action precision could ensure and will get the best injection result. And the servo system compared with traditional machine, its holding pressure is more stable and dwell time is much extended which is better for test tube molding. Besides, dynamic servo motor with a response time of only 0.05sec and machines runs at very lower noise level and operate stability. If you want to set up your own battery box molding factory, pls kindly contact me, I am glad to reply you and offer best solution for you.

Post by Miss Mandy
Email: service32@sinomould.com
Whatsapp:008615757610702

Plastic Dust Bin Mold Service

Household dust bin mold, industrial dust bin mold are the core of our business for more than 20 years. We can offer various sizes with high quality and prompt delivery, like 1L, 5L, 10L, 20L, 25L household dust bin mold, 20L, 40L,50L,60L,120L,240L,360L,1000L industrial dust bin mold.

Why dust bin molds made by us are better than others?

1. Short cycle time

You can cut cycle time from two sides: One is good water channel, another one is mold action design. We have more than 10 experienced specialists to check every mold design before mold make to ensure the run action is easy and reasonable. Our water channel design has two features: intensive and multi-group.

2. Never eccentricity

Eccentricity is the most common problems occur on dust bin molds. We control it from two sides: one is close check each mold part according to part drawing; another one is making all the wear blocks strong enough to control the tolerance within 0.01mm.

3. Long mold life

We use supreme class steel for each mold, and every part of mold is checked by our QC department to ensure steel hardness. What’s more, the ratio between product size and mold size is reasonable.

4. Perfect parting line finishing, no any sharp edges.

Sharp edge on the dust bin is dangerous, in order to avoid the sharp edge, we need 3 stages finishing, from rough milling to steel hardened.

5. The stackable is perfect

When the dust bin product design is doing, we have to check its stackability. And we also pay high attention on avoiding deformation of the dust bin molding.

Post by Miss Mandy

Email: service32@sinomould.com

Whatsapp: 008615757610702