Paint Bucket Mould

Have you made paint bucket mould in China? Do you ever failed in paint bucket drop or stacking test? Are you keeping on looking for high quality paint bucket mould supplier? Come to Sino, we can offer various size and design paint bucket moulds for you, and share all teachinal ponits with you.

How to make a good paint bucket mould? Sino has accumualted rich experiecne in design and inspection system.

1. When get order from customer, Sino will ask for material specifiaction, stacking, dropping and assembling requirement, weight and size tolearance. We will make mold-flow to anaysis the product flling effect, and will send report to customer.

2. We pay high attention on wall thickness, since for paint bucket mould, it is easily cause the barrel of uneven thickness. If the cooling is not equal in the different area of the pail mould core and cavity, this will cause the following difference of the melted material, the more hot area flowance will be bigger and the colder area the flowance will be smaller. then the hot area's pail wall thickness will be thicker. The temperature difference normally caused at least 0.05mm... Normally, the pail mould the interlock height should be 20 to 30% of the plastic pail's height, for example the smaller pail should be 20%, the bigger pail mould should be around 30% height. The machining process is meaning which kind of machining should we select and what we should take care when we make the machining to the pail mould core and cavity.

3. Drop test process. Sino has standard drop test procedure and pre-analysis report before making painting bucket. Therefore, the drop test can be easily passed by our QC department.

We can not only offer high quality paint bucket mould, but also can offer the whole IML paint bucket production line. If you are interest, pls kindly send enquiry to me, I will share more technical points with you, thanks!

Post by Ms Mandy 

Email:auto@sinomould.com 

Whatsapp: 008615757610702